 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 150 WATT 7.5 - 510 VOLTS TRANSIENT SUPPRESSOR DESIGNER'S DATA SHEET FEATURES: High Surge Rating Hermetically Sealed in Glass Available to TX, TXV, and Space Levels OD OA C B C DIM A B C D MIN. ----1.0" .028" MAX .085" .170" --.034" AXIAL(L) C Maximum Ratings CHARACTERISTICS Steady Off Voltage Steady State Power Dissipation Peak Pulse Power @ 1.0 msec Peak Pulse Power And Steady State Power Derating Symbol Value Units OA VRWM PD PPP 3-370 3 150 See Graph See Graph V W W B DIM A B C MIN .077" .130" .010" MAX .083" .146" .022" Peak Pulse Power And Pulse Width Operating and Storage Temperature ROUND TAB (SM) All dimensions are prior to soldering -65C to + 175C C A STEADY STATE POWER VS. TEMPERATURE DERATING CURVE D A B PEAK PULSE POWER VS. TEMPERATURE DERATING CURVE DIM A B C D MIN. .090" .175" .022" Body to Tab Clearance: .002" MAX. .100" .215" .028" SQUARE TAB (SMS) All dimensions are prior to soldering Note: SSDI's Transient Suppressors offer standard Breakdown Voltage Tolerance of 10%(A) and 5%(B). For other Voltages and Voltage Tolerances, contact SSDI's Marketing Department. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00001B DOC ST150A7.5 thru ST150A510 Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS PART NUMBER Break Down (note 1) MAX REVERSE STANDOFF PEAK PULSE CLAMPING MAXIMUM CONTINUOUS (NOTE 3) DYNAMIC IMPEDANCE (NOTE 2) MAXIMUM TEMPERATURE COEFFICIENT Nominal Voltage Test Current Voltage Reverse Leakage Current IR @ VRWM Voltage (max.) @ Current tp=1ms (NOTE 4) VBR For 5% Voltage Tolerance Specify "B" in place "A" @IBRT VRWM Vc IPP IRM ZBR @ IBRT TC @ 25C Volts 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 mA 100 100 50 50 50 50 50 50 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 2 2 2 2 2 2 2 2 2 2 2 Volts 3 4 5 7.1 7.8 8.6 9.5 10.5 11.4 12.4 14.3 15.5 17.1 19.0 20 23 26 29 31 34 37 41 45 49 53 59 65 71 77 86 95 105 114 124 143 152 171 190 210 230 260 290 310 340 370 A 50 10 10 7 3 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Volts 13.3 14.8 15.7 17.0 18.9 20.9 22.9 25.6 28.4 31.0 33.8 38.1 42.2 46.2 50.1 54.1 60.7 65.5 70.8 78.6 86.5 94.4 103 114 126 139 152 167 185 204 224 249 276 305 336 380 419 459 498 537 603 655 707 789 882 A 11.3 10.1 9.6 8.8 7.9 7.2 6.6 5.9 5.3 4.8 4.4 3.9 3.6 3.2 3.0 2.8 2.5 2.3 2.1 1.9 1.7 1.6 1.5 1.3 1.2 1.1 1.0 0.90 0.81 0.73 0.67 0.60 0.54 0.50 0.45 0.40 0.36 0.33 0.30 0.26 0.25 0.23 0.21 0.19 0.17 mA 400 360 330 300 250 230 200 185 170 150 135 125 110 100 90 85 65 60 55 50 45 40 35 30 30 25 25 20 20 20 20 18 18 15 15 15 12 12 11 10 9 8 7 7 6 Ohms 2 2 4 4 7 7 10 10 15 15 15 15 15 15 15 15 40 40 45 45 60 60 80 80 100 100 200 200 250 250 300 300 350 400 500 750 850 1000 1500 1900 2200 2800 3500 4500 5500 %/C .07 .08 .08 .09 .10 .10 .10 .10 .11 .11 .11 .11 .11 .11 .11 .11 .11 .11 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .13 .14 .14 .14 .14 .15 .15 .16 ST150A7.5 ST150A8.2 ST150A9.1 ST150A10 ST150A11 ST150A12 ST150A13 ST150A15 ST150A16 ST150A18 ST150A20 ST150A22 ST150A24 ST150A27 ST150A30 ST150A33 ST150A36 ST150A39 ST150A43 ST150A47 ST150A51 ST150A56 ST150A62 ST150A68 ST150A75 ST150A82 ST150A91 ST150A100 ST150A110 ST150A120 ST150A130 ST150A150 ST150A160 ST150A180 ST150A200 ST150A220 ST150A240 ST150A270 ST150A300 ST150A330 ST150A360 ST150A390 ST150A430 ST150A470 ST150A510 NOTES: Suffix "L" for axial lead, "SM" for surface mount Round Tab. "SMS" for Square Tab. 1) All zener voltages are measured with an automated test set using a 35 msec test time. Longer or shorter test time will have a corresponding effect on the measured value due to heating effects. 2) Zener impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC zener test current superimposed on the test current. 3) Ratings based on maximum zener voltage of individual units (leaded units). Multiply by 1.3 for SM and SMS devices. 4) Figures shown are for a peak sinusoldal surge current of 8.3 msec duration, non-repetitive. The 8.3 msec square pluse rating is 71% of the value shown. 5) SSDI standard marking consists of a contrasting color cathode dot or band. Part number information is included on packaging labels. For optional high reliability screening or higher nominal zener voltages, consult SSDI MARKETING Department. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00001B DOC |
Price & Availability of ST150A91
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |